Before we understand the costs or the cost of laminate flooring, we need to first determine how the laminate floor is made. The laminate flooring consists of a high-density fiberboard (HDF) core, a melamine impregnated decor flooring, which is a photographic reproduction of a real wood or floor covering on top of which a highly resistant protective cover provides the floor with the necessary protection and durability.
Below is a balancing laminate which not only ensures the stability of the manufacturing process but also prevents moisture from entering the HDF core after the floor has been deposited because of its porosity.
Under the pressure and warmth, this sandwich is tied to form a huge floorboard, which is then cut into smaller sheets whose edges are profiled so that the sheets can be clicked. without any glue being applied. During the manufacturing process, surface coatings such as embossing and texturing are used.
The actual pattern or tree appearance is decor paper. Decor paper is a melamine impregnated photographic reproduction of a wood or tiled floor.
The top layer of laminate flooring is a very strong, highly resistant, protective, transparent casing that uses melamine impregnated corundum (Al²O). Non-porous, so any form of moisture is impossible to enter the upper HDF core plate, so floor covering can not be used on laminated floor as the floor is not absorbed.
The thickness of laminate flooring is important as it determines the thickness and standard of laminate flooring. The laminate floor can be sold in any thickness, but it is usually sold in thicknesses of 6 mm, 7 mm, 8 mm, 10 mm and 12 mm.
The 6mm laminate flooring is mainly made in the largest European factories where you can quickly prepare laminate material to create some value.
7mm and 8mm The laminate flooring is manufactured mainly in Europe and the USA
10 mm and 12 mm are generally manufactured in Europe with up to 10 laminate lines and 10 mm and 12 mm slower manufacturing which are generally of greater thickness, embossed and angular.
8.3mm, 10.3mm, and 12.3mm plywood comes from China and is generally not allowed – so beware of 0.3 because of the argument against the patent system and believe it to be slightly better. So you can quickly tell the origin of a country, only 0.3 mm – this is 99.9% of the time spent in China.
You now understand where the product comes from, let's see what the laminate floor cost is:
1. The core board, it makes the product 6mm, 7mm, 8mm, etc., etc. The thicker the core is the small cost difference of the product.
2. The melamine primer – this gives the laminate structure
3. The Décor Paper – melamine impregnated photographic reproduction is a wood or tile flooring.
4. Transparent melamine overlapping. The upper surface of the floor is a very strong, highly resistant, protective, translucent top coat that uses melamine impregnated corundum (Al²O).
5. Finish – Micrograph, registered and embossed, wood sector, mild grain, etc.
6. Completely vertically integrated, if a factory is fully integrated, this is IMPORTANT – its raw materials, collects and manages the forest and creates its own core table.
7. Shipping Costs – If a factory is not fully integrated, you need to ship the central card and that's expensive – you need to buy a central card from another company (such as Georgia Pacific). product. Virtually no vertically integrated factories can not control their costs because they are subject to central card costs and market fluctuations.
8. Marketing costs, trademarks, advertising, etc.
9. Packaging materials, boxes in which the product enters.
10. Adds display installation instructions.
11. Personnel – employees
12. Manufacturing speed – the faster the laminate is produced, the cheaper it will be because the unit cost is basically the total cost overrun
Laminate = Number of elements listed above produce the cost of laminate flooring if not a vertically integrated laminate factory (90% of factories – even if not recognized) can produce 7 mm laminate flooring $ 0.50SF from $ 0.55SF.
Source by sbobet